Comprehensive laboratory capabilities and support
for labs
Vibratory Ball Mill Series
Vibratory Ball Mill is developed specially for dry and wet grinding of small sample amounts. It is known as laboratory “all-rounders” . It can rapidly and efficiently grinded and homogeneous in a very short time and at frequencies up to 35Hz. Under certain grinding conditions, it can reach sub micron level for some application. Grinding can be done in dry, wet or freeze. 2 samples from 0.2 to 45 mL can be pulverize at the same time.
AM100S is also perfectly suitable for the disruption of biological cells as well as for DNA/RNA recovery. Various types of materials for grinding jars and balls are available for different application.
Planetary Ball Mill Series
Planetary ball mill is suitable for dry and wet material grinding ranging from soft to hard, brittle and toughness. Wet grinding is suitable for high fineness to meet the requirements of preparing alloy by mechanical method.
The design of the planetary ball mill is suitable for long duration grinding with is suitable for preparation of nanomaterials. The instrument comes with different features such as intermittent pause, clockwise and anti-clockwise rotation. Two grinding periods with different rotational speed can be set for different application needs.
Cutting Mill Series
AM300 Series Cutting mill is suitable for soft, medium-hard, toughness and fibrous samples. Different speed settings can be set for various application especially in dealing with temperature sensitive samples.
The strong and high torque three-phase motor is highly efficient when dealing with complex samples such as solid waste. The system is equipped with safety interlock features for safe operation. AM300S can be installed with cyclone separator for fibrous or light weight samples application.
Other Series
AM350 Beater Mill
Rotor Beater Mill is mainly suitable for crushing dry, soft, brittle, and medium-hard samples. It can be used in laboratory sample preparation, industrial batch or continuous processing as it offers a wide range of different torque selection.
The AM350 can accept the feed size of 25mm and is capable of crushing to the fineness of about 100um with strong driving force and high speed of 10,000 rpm. The Rotor Beater Mill can be configured with different Rotor and bottom sieve, which is convenient for users to choose according to their needs and application.
AM360 Turbo Mill
Turbo mill is suitable for batch or continuous coarse and fine grinding of soft, medium and hard materials, organic and inorganic samples. It can be used for both the preparation of laboratory samples and the preparation of larger samples in the pilot workshop. AM360 Turbo Mill, with large grinding energy and short grinding time, can avoid rapid heating of materials and achieve excellent grinding effect. The 360-degree full-angle ring screen improves the grinding efficiency and increases the controllability of the grinding results. Adjustable speed range from 2000-10000rpm, adapt to different application needs
AM500S High Speed Rotary Mill
AM500S high speed rotary mill is known as the “Superpower lightning man” in the laboratory. Generally suitable for soft, medium-hard, brittle, fibrous samples. The high speed makes the sample comminuted in a very short time , which ensures particularly efficient grinding.
The key features of the AM500S is the design of the escape-free hopper to prevent samples spillage. The rotor and sieve ring are easily access which makes cleaning simpler.
AAM500S is a highly configurable with automatic injector and cyclone separator to adapt for different applications
AM600 Knife Mill
AM600 knife mill is the most widely used in the food industries. Not only it is highly effective with dry, elastic, tough, brittle, fibrous, soft, and medium hard samples, but also samples with high moisture, high oil and high fat content. The knife and container can easily be removed for cleaning. Different types of knife and container are available for different application needs.
AM200S Mortar Grinder
AM200S mortar grinder is a classic mill using the concept of traditional manual grinding . It comes with a simple and convenient operation suitable for soft, hard, brittle and pasty samples. Repeatable grinding result can be achieved with the digital display speed.
AM700 Jaw Crusher
AM700 Jaw Crusher is suitable for high degree of size reduction, large amounts or continuous crushing operations. Fast precommmution for medium-hard, hard and brittle samples. AM700 can be applied not only for samples with less batch processing but also for continuous processing of larger samples. Escape-free hopper with cleaner interface can achieve good effect of dust removal. The front door of the grinding cavity can be opened directly for easy cleaning. Gap width adjustment and digital display is available. Zero-point adjustment ensures repeatability of experimental results.
AM750S Bench Jaw Crusher
AM750S Bench Jaw Crusher is designed for a small volume of samples in the laboratory, It a compact model that save a lot of space. Suitable for sample process with small sample quantity and large feed size. The design of funnel dust prevention and back splashing ensures that the working environment of the laboratory is not polluted. The jaw is easy to disassemble for ease of cleaning. Digital display regulates the width of the two jaws and have the function of zero-point correction, increasing the lifespan of the jaw. The adjustable speed of the jaw can be applied to different samples and sample quantities.
AM740R Roll Crusher
AM740R Roll Crusher smash materials by two pairs of opposite moving roller. Materials enter to crushing chamber from feed, By friction of the opposite moving roller, materials will be crushed roughly. The first-time crushed material will flow to the chamber of another two-moving roller, and to crush again. The smallest cleft of the two rollers is the width of discharge gate, which is equal to the largest feed size of the crushed materials. If the material is too hard to crush, cleft between two rollers will be increase, to allow hard material to be discharge by the function of spring, rollers will be recovered to the normal cleft, to protect machine. Roll crusher is suitable for crushing medium, hard, and fragility materials and to make sample preparation into comminution.
AF100S Vibratory Sieve Shaker
AF100S mainly sieves powder samples, loose materials and suspended solids. It is a three-dimensional vibratory screening instrument with horizontal, up and down vibration. AF100S can be used with dry sieve and wet sieve, increasing the diversity of sample sieving. Convenient screen cover with fast fastening device, greatly improves the sieving efficiency. The design of 100 mm, 150 mm, 200 mm, 300 mm sieves allows users to choose the sieve components of samples freely to achieve the function of multi-machine integration. Multi-functional operation panel, ease of operation, different amplitudes and intermittent time adjustment allowing for different samples sieving.
AF200S Sample Automatic Divider
AF200S sample dividers are rotating dividers separating all pourable solids up to 12 mm with high accuracy that the characteristic composition of each fraction of the sample corresponds exactly to that of the original bulk sample. This high degree of dividing accuracy and reproducibility is achieved with both fine and coarse materials. The material feed and dividing processes take place automatically, without interruption and loss of material. The feed amount can range from a few grams up to 5000 g depending on the sample vessels used. It is capable to produce an individual number of identical fractions for various applications by the repeated division or combination of fractions
AF300 Vibratory Feeder
AF300 Vibratory Feeder can achieve optimal feed, constant feed rate and controllable speed. It can be rotated freely to ensure consistency with the entry center of the sub crown, which is beneficial to the addition of samples without leakage.
AF400 Sample Automatic Divider
AF400 Sample Automatic Divider can adjust the ratio of the fractions. It is suitable for powdered or granular bulk materials with particle sizes up to 10 mm. It is widely used for the simple division and reduction of bulk materials of all kinds. The rotating divider is available with bottom cones for 1, 2 or 3 samples. The gap width adjusts the ratio of the fractions and therefore achieving the amount of the part sample.
AF450 Sample Automatic Divider
AF450 Rotating Divider has two functions of sampling and shrinking. Large particle samples can be divided and shrunk. Different sample module can provide different sample proportion selection.
AF450 ensures automatic and synchronous sample injection, allowing the sampling process consistent and representative from beginning to end.
AF500 3D Sample Mixer
The AF500 3D Sample Mixer is a three-dimensional sample mixer mainly used to mix substances of different types, different particle sizes and requiring high uniformity mixing. The sample is mixed in a fully enclosed container for dry-dry sample mixing, dry-wet sample mixing, and wet-wet sample mixing. The entire process ensures dust-free operation for ease of cleaning.